H-SCF Multi-Round Sanitary Filter Housing designed for liquid filtration with varying flow rates.
Flow redesign with flow pattern of side-in and bottom-out reduce cost when compared to bottom-in bottom-out flow pattern. In addition, top-inlet opening eliminates the need to move the housing body while installing the filter elements, thus reducing filter change-out time.
Strongly recommended for use in life science filtration applications, it meets sanitary requirements and GMP standards. Features include mechanical polishing with a Ra of 0.3μm, easy-to-clean, and thorough drainage, which eliminates concerns about remaining liquids. In addition, the filter housing is available with a detachable plate for thorough cleaning with strict cleaning requirements.
It is also available in an electro-polish finish for filter housings with 12 rounds or less.
H-SCF:
bottom-opening; fixed plated; bottom-in bottom-out flow pattern
H-SDF:
top-opening and bottom-opening; fixed plate; bottom-in bottom-out out flow pattern
H-SEF:
bottom-opening; detachable plate; bottom-in bottom-out out flow pattern
H-SFF:
top-opening and bottom-opening; detachable plate; bottom-in bottom-out out flow pattern
| Polish Type | Mirror Polish or Internal Electro-polished |
| Surface Option | Internal Ra: 0.3μm or External Ra: 0.4μm |
| Max. Operating Pressure | 1.0 Mpa (10 bar) |
| Max. Operating Temperature | 130°C（266°F） |
| Steam Sterilization | In-situ / Autoclave @ 121°C / 30 min |
| Housing Body | 304 or 316L |
| Vent / Drain | 304 or 316L |
| Vent Clamp | 304 |
| Eyebolt | 304 |
| Leg | 304 |
| O-ring/Gaskets | Silicon, Viton, EPDM |
| Body Connection | Flange (Eyebolt) |
| nlet / Outlet | Tri-clamp |
| Vent | Tri-clamp; ID 4mm and for 8mm tube |
| Pressure Gauge | 1.5 inch Tri-clamp |
COPYRIGHT 2014 Hangzhou Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
