Cobetter H-HF150 Series Industrial Filter Housing designed for use with HF150 Series Filter Cartridges and mainly used for large fluid (liquid/water) flow rate applications, especially in water treatment. Designed for large flow rates, this filter housing requires a small area for installation. It is cost efficient and easy to operate when compared to traditional filter housings. It is available in 304 or 316L stainless steel, which ensures strong corrosion resistance for a wide range of applications.
Surface Finish
Polish Type | Mirror Polish;Internal mirror Finish Outer sand |
Surface Option | Internal Ra 0.6μm; External Ra 0.8μm |
Operating Conditions
Max. Operating Pressure | 0.6Mpa(6 bar) /1.0Mpa(10 bar) |
Max. Operating Temperature | 135℃(266℉) |
Steam Sterilization | null |
Material of Construction
Housing Body | 304;316L |
Vent/Drain | 304;316L |
Clamp | 304 |
Leg | 304 |
O-ring / Gaskets | Silicon, Viton, EPDM |
Connection
Body Connection | Swing Bolt/C-Clamp |
Inlet / Outlet | Flange |
Vent | G1/2" |
Drail | G1" |
Pressure Gauge | M14*1.5 |
Drawing
1 round | 3 round | 4 round | 5 round | |||||
40" | 60" | | 40" | 60" | | 40" | 60” | | 40" | 60" | |
Height(A) | 1555 | 2055 | | 2170 | 2670 | | 2200 | 2700 | | 2580 | 3080 |
Inlet to Body Center(B) | 250 | 250 | | 380 | 380 | | 400 | 400 | | 410 | 410 |
Diameter(C) | 219 | 219 | | 400 | 400 | | 450 | 450 | | 550 | 550 |
Inlet to Ground(D1) | 1355 | 1855 | | 1655 | 2155 | | 2175 | 2675 | | 1840 | 2340 |
Inlet to Ground(D2) | 335 | 335 | | 405 | 405 | | 420 | 420 | | 550 | 550 |
Outlet to Ground(E) | 150 | 150 | | 150 | 150 | | 200 | 200 | | 200 | 200 |
6 round | 7 round | |||
40" | 60" | | 40" | 60" | |
Height(A) | 2600 | 3100 | | 2600 | 3100 |
Inlet to Body Center(B) | 455 | 455 | | 455 | 455 |
Diameter(C) | 550 | 550 | | 550 | 550 |
Inlet to Ground(D1) | 1860 | 2360 | | 1860 | 2360 |
Inlet to Ground(D2) | 570 | 570 | | 570 | 570 |
Outlet to Ground(E) | 200 | 200 | | 200 | 200 |
Ordering Information