Home Products Industrial Liquid Filter Cartridges H2D Nanofiber Depth Filter

H2D Nanofiber Depth Filter

Cobetter H2D series pleated polypropylene cartridges use single-layer polypropylene membrane with support layer, featuring high dirt-holding capacity and high efficiency. Notable features: High efficiency (similar to APP).

Recommended Applications：

Request a Quote

Description Specifications Ordering Information

Description

Features

High Efficiency

Applications

Colloid material pre-filtration
Blood product pre-filtration
API pre-filtration
Dispensing system pre-filtration

Quality

Each filter is fully traceable with unique serial number
Manufactured in a facility which adheres to ISO 9001:2015 Practices

Flow Rate Characteristics

Specifications

Materials of Construction

Membrane	Polypropylene (PP)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Operating Conditions

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Particle Retention

Retention Rates of Each Particle Size（%）
H2D	1.2 μm	2.5 μm	4.5 μm	6.0 μm	10 μm	15 μm	20 μm	30 μm	40 μm	100 μm
0.3 μm	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
0.6 μm	≥99.50	≥99.90	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
0.8 μm	≥99.20	≥99.50	≥99.90	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
1.2 μm	≥99.00	≥99.20	≥99.50	≥99.90	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
2.5 μm	-	≥99.00	≥99.20	≥99.50	≥99.90	≥99.99	≥99.99	≥99.99	≥99.99	≥99.99
4.5 μm	-	-	≥99.00	≥99.20	≥99.50	≥99.90	≥99.99	≥99.99	≥99.99	≥99.99
6.0 μm	-	-	-	≥99.00	≥99.20	≥99.50	≥99.90	≥99.99	≥99.99	≥99.99
10 μm	-	-	-	-	≥99.00	≥99.20	≥99.50	≥99.90	≥99.99	≥99.99
15 μm	-	-	-	-	-	≥99.00	≥99.20	≥99.50	≥99.90	≥99.99
20 μm	-	-	-	-	-	-	≥99.00	≥99.20	≥99.50	≥99.90
30 μm	-	-	-	-	-	-	-	≥99.00	≥99.20	≥99.50
40 μm	-	-	-	-	-	-	-	-	≥99.00	≥99.20
100 μm	-	-	-	-	-	-	-	-	-	≥99.00

Sterilization

In-line steam sterilization

Up to 20 cycles (125°C for 30 minutes < 30 kPa per cycle)

Regulatory Compliance

Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a "Non-fiber-releasing filter" as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

End Cap

Ordering Information

Outer Diameter	Type	Removal Rating	End Cap	Nominal Length	Seal Material	Industry
Blank 68mm	H2D	0030 0.3 μm	DOE Double Open End	05 5 inch	S Silicone	C
		0060 0.6 μm	HTF 222/Fin (PBT insert)	10 10 inch	E EPDM	P
		0080 0.8 μm	HSF 226/Fin (PBT insert)	20 20 inch	V Viton
		0120 1.2 μm	HTCG 222/Flat (PBT insert)	30 30 inch	P FEP/PFA encapsulated O-rings
		0250 2.5 μm	HSCG 226/Flat (PBT insert)	40 40 inch
		0450 4.5 μm
		0600 6.0 μm
		1000 10 μm
		1500 15 μm
		2000 20 μm
		3000 30 μm
		4000 40 μm
		100H 100 μm

*Example：H2D0030DOE05SC (H2D，0.3μm，Double open end，5 inch，Silicone，Industrial)

靠逼视频,日韩三级中文字幕91,很狠狠很久久久久久久之,1级蜜臀av