靠逼视频,日韩三级中文字幕91,很狠狠很久久久久久久之,1级蜜臀av

Home Products Industrial Liquid Filter Cartridges

HPP Polypropylene Pre-filter

Cobetter HPP series filter makes high-accuracy and low-cost filtration a reality. High flow rate and high dirt-holding capacity characteristics make HPP series filter an economical pre-filtration filter.
Recommended Applications：
Request a Quote

Description

Features

  • Continuously reliable high filtration efficiency
  • Filter media that can withstand high backlash pressure differences reduce filter replacement cycles and production costs
  • Wide chemical compatibility, suitable for filtering various acids, bases and solvents
  • A series of removal ratings from 0.1um to 70um meet various filtering situations

Applications

  • Pre-filtration of infusion solutions, biological products and fermentation solutions
  • Pre-filtration and fine filtration of process water 
  • Security filtration of reverse osmosis water treatment process

Quality

  • 100% Integrity testing in manufacturing
  • Each filter is fully traceable with unique serial number
  • Manufactured in a facility which adheres to ISO 9001:2015 Practices

Flow Rate Characteristics

Specifications

Materials of Construction

Membrane Polypropylene (PP)
Support Polypropylene (PP)
Core/Cage/End Caps Polypropylene (PP)
End Cap Inserts Polybutylene terephthalate (PBT)
Seal Material Silicone / EPDM / Viton
FEP/ PFA encapsulated O-rings


Operating Conditions

Max. Operating Temperature 80°C
Max.Operating Pressure 0.69 MPa@25°C
0.40 MPa@60°C
0.24 MPa@80°C
Max. Differential Pressure (Forward) 0.69 MPa@25°C
0.40 MPa@60°C
0.24 MPa@80°C
Max. Differential Pressure (Reverse) 0.30 MPa@25°C
0.10 MPa@80°C


Filtration Area

Outer Diameter Removal Rating Area / 10"
68mm 0.2 μm 0.50 m2
68mm 0.45 μm 0.48 m2
68mm 1.0 μm 0.53 m2
68mm 3.0 μm 0.57 m2
68mm 5.0 μm 0.57 m2
68mm 10 μm 0.62 m2
68mm 20 μm 0.63 m2


Particle Retention

Retention Rates of Each Particle Size（%）
HPP 1.0 μm 3.0 μm 5.0 μm 10 μm 20 μm
0.2 μm ≥99.90 ≥99.90 ≥99.90 ≥99.90 ≥99.90
0.45 μm ≥99.00 ≥99.50 ≥99.90 ≥99.90 ≥99.90
1.0 μm ≥90.00 ≥95.00 ≥99.00 ≥99.50 ≥99.90
3.0 μm - ≥90.00 ≥95.00 ≥99.00 ≥99.50
5.0 μm - - ≥90.00 ≥95.00 ≥99.00
10 μm - - - ≥90.00 ≥95.00
20μm - - - - ≥90.00


Sterilization

In-line steam sterilization Up to 20 cycles (125°C for 30 minutes < 30 kPa per cycle)



Regulatory Compliance

  • Component materials meet the criteria for a "Non-fiber-releasing filter" as defined in 21 CFR 210.3(b)(6).
  • Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
  • Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
  • Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
  • All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
  • Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.


End Cap


Ordering Information

Outer Diameter Type Removal Rating End Cap Nominal Length Seal Material Industry
Blank   68mm HPP 0020   0.2 μm DOE   Double Open End 05   5 inch S   Silicone C
71   71mm 0045   0.45 μm HTF   222/Fin (PBT Insert) 10   10 inch E   EPDM P
0100   1.0 μm HSF   226/Fin (PBT Insert) 20   20 inch V   Viton F
0300   3.0 μm HTCG   222/Flat (PBT Insert) 30   30 inch P   FEP/PFA encapsulated O-rings
0500   5.0 μm HSCG   226/Flat (PBT Insert) 40   40 inch
1000   10 μm

2000   20 μm


*示例：HPP0020DOE05SC (HPP, 0.2μm, Double open end, 5 inch, Silicone, Industrial)

Related Products