靠逼视频,日韩三级中文字幕91,很狠狠很久久久久久久之,1级蜜臀av

Home Products Industrial Liquid Filter Cartridges

PFSA2 Polypropylene Pre-filter

Cobetter PFSA2 adopts gradual pore size fibre depth filtration technology, with the collocation of multi-layer membrane, greatly improves the dirt-holding capacity and slows surface clogging. The graded pore size distribution from coarse(upstream) to fine(downstream) removes particles gradually and extends the filter's service time, making it especially suitable for high suspended particulates, colloids, and viscous liquids. Notable features: high dirt holding capacity + high efficiency
Recommended Applications:
Request a Quote

Description

Features

  • High dirt holding capacity and inherent adsorption ensure high particle retention efficiency
  • Low pressure drops, high flow rates, long service life, economical and practical
  • Excellent particle retention efficiency to protect the final sterilization cartridge
  • Polypropylene construction yields excellent chemical compatibility

Applications

  • Colloid material filtration
  • Culture media filtration
  • High viscosity material filtration
  • Fermentation liquid filtration
  • Blood product pre-filtration

Quality

  • Each filter is fully traceable with unique serial number
  • Manufactured in a facility which adheres to ISO 9001:2015 Practices

Flow Rate Characteristics

Specifications

Materials of Construction

Membrane Polypropylene (PP)
Support Polypropylene (PP)
Core/Cage/End Caps Polypropylene (PP)
End Cap Inserts Polybutylene terephthalate (PBT)
Seal Material Silicone / EPDM / Viton
FEP/ PFA encapsulated O-rings


Operating Conditions

Max. Operating Temperature
80°C
Max.Operating Pressure
0.69 MPa@25°C
0.40 MPa@60°C
0.24 MPa@80°C
Max. Differential Pressure (Forward)
0.69 MPa@25°C
0.40 MPa@60°C
0.24 MPa@80°C
Max. Differential Pressure (Reverse)
0.30 MPa@25°C
0.10 MPa@80°C


Filtration Area

Outer Diameter Removal Rating Area/10"
71mm 0.2 μm 0.21 m2
71mm 0.5 μm 0.29 m2
71mm 1.0 μm 0.26 m2
71mm 2.0 μm 0.26 m2
71mm 3.0 μm 0.20 m2
71mm 5.0 μm 0.26 m2
71mm 10 μm 0.26 m2
71mm 20 μm 0.29 m2
71mm 40 μm 0.29 m2
71mm 70 μm 0.29 m2


Particle Retention

Retention Rates of Each Particle Size(%)
PFSA2 1.0 μm 2.0 μm 3.0 μm 5.0 μm 10 μm 20 μm 40 μm 70 μm
0.2 μm ≥99.90 ≥99.90 ≥99.90 ≥99.90 ≥99.99 ≥99.99 ≥99.99 ≥99.99
0.5 μm ≥99.00 ≥99.50 ≥99.90 ≥99.90 ≥99.90 ≥99.99 ≥99.99 ≥99.99
1.0 μm ≥98.00 ≥99.00 ≥99.50 ≥99.50 ≥99.90 ≥99.98 ≥99.99 ≥99.99
2.0 μm - ≥98.00 ≥99.00 ≥99.00 ≥99.50 ≥99.90 ≥99.98 ≥99.99
3.0 μm - - ≥98.00 ≥99.00 ≥99.50 ≥99.50 ≥99.90 ≥99.98
5.0 μm - - - ≥98.00 ≥99.00 ≥99.50 ≥99.90 ≥99.98
10 μm - - - - ≥98.00 ≥99.00 ≥99.50 ≥99.90
20 μm - - - - - ≥98.00 ≥99.00 ≥99.50
40 μm - - - - - - ≥98.00 ≥99.00
70 μm - - - - - - - ≥98.00


Sterilization

In-line steam sterilization Up to 20 cycles (125°C for 30 minutes < 30 kPa per cycle)


Regulatory Compliance

  • Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
  • Component materials meet the criteria for a "Non-fiber-releasing filter" as defined in 21 CFR 210.3(b)(6).
  • Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
  • Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
  • Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
  • All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
  • Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.


End Cap


Ordering Information

Outer Diameter Type Removal Rating
End Cap Nominal Length
Seal Material Industry
71   71mm PFSA2 0020   0.2 μm DOE   Double Open End 05   5 inch S   Silicone C
0050   0.5 μm HTF   222/Fin (PBT Insert) 10   10 inch E   EPDM P
0100   1.0 μm HSF   226/Fin (PBT Insert) 20   20 inch V   Viton F
0200   2.0 μm HTCG   222/Flat (PBT Insert) 30   30 inch P   EFP/PFA encapsulated O-rings
0300   3.0 μm HSCG   226/Flat (PBT Insert) 40   40 inch
0500   5.0 μm
1000   10 μm
2000   20 μm
4000   40 μm
7000   70 μm

* Example: PFSA20020DOE05SC (PFSA2, 0.2μm, Double open end, 5 inch, Silicone, Industrial)

Related Products

日韩一二三精品欧美精品| .av天堂.com| 国产欧美丰满一区二区17.c| 亚洲天堂久久久精品| 亚洲Av 成人一二三区| 国产精品夜夜视频| 欧美操天天天天| 69久久久精品| 少妇高潮免费在线观看| 九一精品麻豆99999| 99精品欧美一区二区蜜| av久久小久久久久久久 | 精品乱码久久久久| 欧美一级二级三级久久久久久久| 好屌妞,这里只有精品| 一区乱二区国三区乱| 台湾佬中文视频在线| 大香蕉久久橾2| 一区二区三区四区免费av| 夜夜夜夜综合久久久| 91午夜精品一区二区传媒蜜臀| 尾随漂亮美女主播国产巨| 色婷婷久久综合****狠狠野花| 韩国日本午夜在线播放| 加勒比狠狠操| 看操逼操| Porn 在线 成人 大尺度| 三级网站国产在线二区九一自拍| 色呦呦中文字幕一区| 中文字幕2019一区二区| 久久六激情人妻| 久久亚洲专区 夕季| 欧美一级在线观看久| 日少妇综合| 轮奸视频一起啊鸡吧好大 | 日韩在线观看一卡| 日本三级人妻在线播放| 国产精品欧美图片| 69久久99精品久久久、、、、| 操逼视频在线观看一区二区三区| 天天日天天爱天天干|